584,866 active members*
5,155 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Join Date
    Sep 2003
    Posts
    37

    UBUNTU 8.10 Upgrade

    Hi all,

    Ive just upgarded my EMC2 to the new ubuntu 8.10 (with the internal upgarde manager) and now EMC2 errors on startup and doesnt work

    has anyone else tried this??

  2. #2
    Join Date
    Apr 2005
    Posts
    1778
    You probably got a new kernel and are now not loading the real time modified kernel.

    Alan

  3. #3
    Join Date
    Sep 2004
    Posts
    149
    8.10 is not supported. You need to stick with 8.04.
    Check out the top of this page:
    http://wiki.linuxcnc.org/cgi-bin/emc...cKnowledgeBase

  4. #4
    Join Date
    Sep 2003
    Posts
    37
    well that's no good for me..
    lucky it's not hooked up to the router just yet..

Similar Threads

  1. Do you have to use ubuntu?
    By phantomcow2 in forum LinuxCNC (formerly EMC2)
    Replies: 15
    Last Post: 09-27-2012, 01:24 PM
  2. Ubuntu & Linux EMC
    By pepperwood in forum LinuxCNC (formerly EMC2)
    Replies: 1
    Last Post: 01-16-2008, 10:41 AM
  3. Ubuntu 6.06 vs Ubuntu 7.1
    By piedpiper in forum LinuxCNC (formerly EMC2)
    Replies: 12
    Last Post: 01-13-2008, 06:41 PM
  4. not ubuntu
    By Mr Bits in forum LinuxCNC (formerly EMC2)
    Replies: 22
    Last Post: 12-19-2007, 03:12 PM
  5. Ubuntu 6.06 & EMC2
    By tenmetalman in forum LinuxCNC (formerly EMC2)
    Replies: 19
    Last Post: 10-12-2006, 03:23 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •