584,829 active members*
4,842 visitors online*
Register for free
Login
Page 2 of 2 12
Results 21 to 23 of 23
  1. #21
    Join Date
    Dec 2003
    Posts
    1206

    Re: Kitchen Worktop Jig

    Quote Originally Posted by kennethls View Post
    Hi Zasto
    This is great! Thanks a lot for your file - I will find a CNC dude to cut it so I can get started on kitchen worktops...
    Just a quick question - trying to find out which size to use for the router...
    I´m danish so sometimes I get lost in translation, sorry
    Is it correct that I have to use a 35mm routerbit and 3/4 router guide bush?

    Best regards,
    Kenneth - Copenhagen
    I wouldn't do that because the bit being larger than the bush means that you will destroy the bush.The sizes look a bit unusual to me,that might be because I am used to a 30mm bush and a 1/2 inch bit being the most often used over here.

  2. #22
    Join Date
    Aug 2018
    Posts
    5

    Re: Kitchen Worktop Jig

    Please head over to our website to get the DXF FILE https://zacels.co.uk/

  3. #23
    Join Date
    Aug 2018
    Posts
    5

    Re: Kitchen Worktop Jig

    Please head over to our website to get the DXF FILE https://zacels.co.uk/

  4. #24
    Join Date
    Apr 2005
    Posts
    304

    Re: Kitchen Worktop Jig

    Very similar DXF file could be found for free
    Make no mistake between my personality and my attitude.
    My personality is who I am. My attitude depends on who you are.

  5. #25
    Join Date
    Mar 2018
    Posts
    2

    Re: Kitchen Worktop Jig

    Worktop Jig dxf file

Page 2 of 2 12

Similar Threads

  1. Kitchen sink
    By berzer in forum Moldmaking
    Replies: 3
    Last Post: 04-22-2013, 08:04 AM
  2. cnc worktop
    By shiv15uk63 in forum Material Machining Solutions
    Replies: 1
    Last Post: 11-20-2012, 04:41 PM
  3. Easycab Pro Kitchen 3D CNC
    By EasycabCNC in forum News Announcements
    Replies: 0
    Last Post: 07-30-2010, 02:42 PM
  4. Easycab Pro Kitchen 3D CNC
    By EasycabCNC in forum News Announcements
    Replies: 0
    Last Post: 06-18-2010, 07:37 PM
  5. Easycab Pro Kitchen 3D CNC
    By EasycabCNC in forum News Announcements
    Replies: 0
    Last Post: 06-01-2010, 05:37 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •