584,802 active members*
4,903 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Hyundai Kia > Hyundai 15s w/840c - serial port issue
Results 1 to 2 of 2
  1. #1
    Join Date
    Oct 2008
    Posts
    6

    Hyundai 15s w/840c - serial port issue

    Anyone out there know how to initalize the serial port on one of these machines? I know that there are parameters to set, etc. however the manual doesn't tell you much of anything about how to do that sort of thing...

    I have set the comm settings & when I try to send or rcv an alarm comes up telling me that the device (serial 1) is not intialized.

    Any help or even pointing me in the right direction would be welcome.

    Thanks!

  2. #2
    Join Date
    Jul 2004
    Posts
    3

    Hyundai 15s w/840c - serial port issue

    I run this machine at work and I transfer programs from the lathe to my computer and back. Maybe I can help. Call me on my cell at 612-298-9828 around 9am sometime.

    Bill

Similar Threads

  1. Hyundai Hit8s with siemens 840c
    By Marx in forum Hyundai Kia
    Replies: 2
    Last Post: 05-30-2009, 08:58 PM
  2. Okuma Serial Port
    By kmc5266 in forum Okuma
    Replies: 13
    Last Post: 07-15-2008, 12:26 PM
  3. serial port
    By lamicron in forum Computers / Desktops / Networking
    Replies: 9
    Last Post: 12-18-2007, 05:42 PM
  4. Strange serial comms issue
    By TLSupper in forum DNC Problems and Solutions
    Replies: 2
    Last Post: 09-27-2007, 07:00 PM
  5. USB to serial port
    By stampman in forum DNC Problems and Solutions
    Replies: 7
    Last Post: 12-30-2006, 08:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •