After days or reading on a subject I know very little about, I still need help.
What I have is a gantry router 14x25x5 10tip NEMA23 mounts, I have decided to go with the Gecko540 but for the life of me I cannot find a stepper match that makes sense to me.
I work mostly with wax and model board on small 4" square areas sometimes larger but only when cutting 20lb foam
Please help me find the right steppers and power supply.. I want to try and get the best match possible for my router and my application but with zero experience all I do is get a headache....
If you have suggestions on what the best match would be or some insight please help stop my obsessing.