[pdingbo]

We need help,we faced some problems in some of the operation.

We could only trasmit NC program in DOS interface, we could not use the DNC function in MILLPLUS interface. We found the problem is due to the parameter of DNC machine is not turned on, and we need pin number to turn it on which we don't know.

MC303=?????? Digitizing (0=off, on=??????）
Mc311=?????? DNC Plus (0=off, on=??????)
??????=Password

the machine details are:

Version: MILLPLUS 94x1.410/00t (ID = 341 482-19)

We would be so appreciation if you could let me know the pin number, many thanks

My Email: [email protected]

[fsa]

We need help,we faced some problems in some of the operation.

We could only trasmit NC program in DOS interface, we could not use the DNC function in MILLPLUS interface. We found the problem is due to the parameter of DNC machine is not turned on, and we need pin number to turn it on which we don't know.

MC303=?????? Digitizing (0=off, on=???????
Mc311=?????? DNC Plus (0=off, on=??????)
??????=Password

the machine details are:

Version: MILLPLUS 94x1.410/00t (ID = 341 482-19)

We would be so appreciation if you could let me know the pin number, many thanks

My Email: [email protected]

hello pdingbo

have you find solution regarding your post about millplus pin number??