I have Matsuura MC-500V with Yasnac J50M controller. After power on it show alarm 330 Emergency Stop and 310 Servo off while I don't press emergency stop button. If i press reset or power on button then no action.
Help me please!
I have Matsuura MC-500V with Yasnac J50M controller. After power on it show alarm 330 Emergency Stop and 310 Servo off while I don't press emergency stop button. If i press reset or power on button then no action.
Help me please!
Today I read machine's manual about alarm code. if check DGN #1821 d1 = 1 then reset emergency stop input. I don't know how to reset emergency stop input.
hi , have you tryed to hold in power on press reset and than handle axis , dose this machine have an oil cooler for the spindle ?
please call YASKAWA @ 1-800-927-5292 ask for cnc support
any one has a matsurra and would to help me
i Have 1 machine Enshu E130 use Yasnac control J50M alarm, 310 Servo off, 335 ABSO POS CHECK ERROR ( X), 336 ABSO POS CHECK ERROR ( Y), 337 ABSO POS CHECK ERROR ( Z) and 338 ABSO POS CHECK ERROR ( 4). Please help me check and fix problem.
Try holding in power on press reset and then handle axis.
yahoo mail login