BobCAD20.4
1st set of hole no problem, machine moves to "new" cord. 1 inch over, however, it will not drill, it goes over 1 inch and moves right back to the master cord 1,1
thanks, I've tried it multiple ways and have even found "examples" off the net with no luck if I try and run them thru the Simulator
N5 G90 G80 G20
N10 M06 T6
N15 M03 S1300
N20 G55 G00 X1.0 Y1.0
N25 Z0.5
N30 G82 Z-.25 R0.125 F5
N35 Y2
N40 X2
N45 Y1
N50 X1.5 Y1.5
N60 G80 G00 Z1
N65 G56 G00 X1.0 Y1.0
N70 Z0.5
N75 G82 Z-.25 R0.125 F5
N80 Y2
N85 X2
N90 Y1
N95 X1.5 Y1.5
N100 G80 G00 Z1
N102 G54
N105 X0 Y0
N110 M05