So I am trying a 4th axis for the 1st time. Exciting. My MasterCam post is outputting what I assume is inverse time feedrates. Is there a setting in the Haas control to switch to this setting or is Inches per Minute my only option?
Thanks again.
Results 1 to 3 of 3
Threaded View
-
12-08-2008, 07:11 AM #1
Registered
- Join Date
- Mar 2007
- Posts
- 86
Inverse Time feedrate for 4th Axis
Reply With QuoteSimilar Threads
-
4-digit feedrate on A Axis?
By ghyman in forum FanucReplies: 6Last Post: 11-05-2008, 04:30 AM -
Help! Rotary axis feedrate
By Matt@RFR in forum MastercamReplies: 3Last Post: 12-25-2007, 01:38 AM -
4 Axis Feedrate Calculation
By cbr120 in forum MetalWork DiscussionReplies: 1Last Post: 12-12-2007, 06:20 PM -
G93 Inverse Time Feed Mode
By MarkT in forum Haas MillsReplies: 2Last Post: 01-18-2007, 07:28 PM -
Inverse time feeds with a 4th axis
By nervis1 in forum FadalReplies: 1Last Post: 11-06-2004, 06:43 AM
Posting Permissions
