We have a PC Turn 50 lathe at our college, which has just fried the motherboard in the pc. I have managed to find a new pc so that I could save the software as have lost all software disks. I have put the RS485 card and hard drive in new pc. All starts up fine with software working, however I don't have a driver for the card, so the pc will not connect to the lathe. Does anyone have the drivers, or is there anywhere I can download the device drivers? Windows 95 drivers required.

Help with this would be appreciated as EMCO have said it will cost over a £1000 to update the lathe to connect to a new PC with Windows XP.