584,866 active members*
4,919 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Feb 2006
    Posts
    24

    Fanuc 3t motherboard HELP!

    I have a 1985 Wasino LG-81 with Fanuc 3T controller. I believe the motherboard just bit the dust. Everything was working fine last time I shut it down a few weeks ago. Now, the monitor will not come on. I followed a checklist in the manual, (checked fuses, and I do have 24v. at the controller.) The trouble shooting checklist pretty much indicates that it's the PCB. (motherboard).

    This is really bad timing for my business. Any suggestions on possible things to try and a good source for a new motherboard, or repair would be greatly appreciated.

    [email protected]
    218-556-1382

  2. #2
    Join Date
    May 2005
    Posts
    109
    Do you see a flash on monitor when turn off power?
    Did you check leds on mother board? Any red led light?

    If light is screen, you should check monitor or monitor cable.
    If there is no led light, check voltage (both 5v and 24v) on check pin.

  3. #3
    Have you checked the 5, 15, -15 on the power supply?
    Do you get any LEDs lit on the master board?
    We have the boards in stock and can repair.
    Give us a call.
    CNC Diagnostic LLC
    813-983-1870

Similar Threads

  1. Replies: 1
    Last Post: 09-20-2008, 12:40 PM
  2. Need motherboard!
    By KurtsKustom in forum Want To Buy...Need help!
    Replies: 0
    Last Post: 04-21-2008, 01:40 PM
  3. Dead Motherboard
    By ger21 in forum Computers / Desktops / Networking
    Replies: 7
    Last Post: 04-07-2008, 01:48 AM
  4. Gecko motherboard
    By drafterman in forum Gecko Drives
    Replies: 4
    Last Post: 12-17-2007, 11:57 PM
  5. New motherboard/processor
    By spoiledbrat in forum Computers / Desktops / Networking
    Replies: 5
    Last Post: 05-29-2007, 02:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •