Hi everybody,
I have a miling"Okuma osp5000,but lost parameter.
Can you help me, please
Thanks
Neko
Hi everybody,
I have a miling"Okuma osp5000,but lost parameter.
Can you help me, please
Thanks
Neko
I do have a set of parameters for an OSP 5000. What kind of machine is your control on? My parameters are for and Okuma MC-40H
the floppy disk should be in the door of the main board
you got 4 or 5 floppy with all default parameter and software
Hello !
Can I have 1 copy of osp5000 parameter sheet
I have osp 5000 machining center MC-5H
Email [email protected]
Best Regards
Hwangbogeun
Dear Friends
We bought a OKUMA LC 30 Used CNC Lathe withOSP 5000 LG Control. We are not Having any Backup Parameter & Software for this Machine.
While switching ON We are getting this alarm No 2136 Bubble Memory Read Error 10000 Parity.
Any body can suggest what to do And mail the Parameter & Software.
Thanks Regard
L. Sakthivel
L. Sakthivel
Email:[email protected], website:www.premierengrs.com
alarm No 2136 Bubble Memory Read Error 10000 Parity
Bubble memory must be replaced
You have a bad memory board (or missing), and you should find the CNC parameters and software inside the machine. Depending on the year of the machine, it will be in the form of LARGE floppy disks or punched paper tape.