i have a multicam router
having problems with g83
material top 1
surface is 0 (bot. of mat.)
safe rapid 1.5
peck dis. .5
total peck depth .875
problem is it drills to .125 1st
then raises & pecks back down to .125
i want it to peck on the way down
can anyone tell me what to change to make it happen?
ex:
G75
G97 S2000
G00 T14
G00 X2.2201 Y4.1962
M12
G83 R-1.25 Z-0.125 D-0.5 F0.833
M22
G00 X5.1576 Y4.1962
M12
G83 R-1.25 Z-0.125 D-0.5 F0.833
M22
G00 X8.2826 Y4.1962
M12
G83 R-1.25 Z-0.125 D-0.5 F0.833
M22
thx
mike