Hello again.
I would really appreciate help IDing this MAE stepper motor. I need to replace it as soon as possible and need some specs or compatible motor. It is - MAE HY200 3450 0350 AX08. What motor replaced it, doesn't have to be MAE
Thank you for your time and any help,
Karl.
Results 1 to 2 of 2
-
12-29-2008, 05:16 PM #1
Registered
- Join Date
- Dec 2008
- Posts
- 3
Try again, please help me ID MAE motor
-
12-29-2008, 05:47 PM #2
Registered
- Join Date
- Jul 2008
- Posts
- 411
Specs here these are for the 3451 not the 3450 but the difference is the length of the motor body (5.1" v 5.0")
Reply With QuoteSimilar Threads
-
use satellite dish actuator motor as a stepper motor
By ozni in forum Stepper Motors / DrivesReplies: 7Last Post: 06-19-2010, 01:55 AM -
Problems with motor stalling due to motor/lead screw alignment
By Bimmerkc1 in forum DIY CNC Router Table MachinesReplies: 3Last Post: 01-25-2010, 01:12 AM -
replacement motor for PML&Kollmorgen DC Brush Servo Motor
By fymroger in forum News AnnouncementsReplies: 2Last Post: 10-24-2008, 09:36 AM -
a paper shredder motor for spindle motor??
By .xXACEXx. in forum DIY CNC Router Table MachinesReplies: 4Last Post: 06-03-2008, 03:17 AM -
servos motor controled by stepper motor driver?
By mike10 in forum Servo Motors / DrivesReplies: 1Last Post: 01-04-2005, 12:05 AM
Posting Permissions
