[syil]

SyiL X6 Standard CNC Release.a linner motion cnc machine.High procision.1200Lbs,Affordable Cost.
yiL X6 Standard CNC Release,More delivery and price info please consult local dealer from Syil.com

package info:
X6 standard will be include those parts become standard parts:
1,stand,2,table cover and oil tary.3,computer arm.4,coolant system.

technical info:
Weight: 600KG
Packing demention: L: 1250mm W: 1200mm H: 2050mm

working travelling:
X: 490mm
Y: 300mm
Z: 240mm

Working demention:
295mm*800mm
T slot: 16mm
Spindle type: R8/MT3/SK30
motor speed:3500rpm

more info please consult our dealer,and video will post later.

xushuo
Syil.china

[syil]

video have been finish,any interesing contact us,we will sent the video..

[syil]

in delivery.....

[syil]

http://www.youtube.com/syilcnc
see the video....

[syil]

US,canada in stocking.more price please consult local dealers.

[syil]

http://syil.com.cn/en/x6.asp

[syil]

www.youtube.com/syilcnc

[syil]

:rainfro:

[PEU]

Xushuo, make better videos of the X6, no one can see its potential from these videos...

Here are some examples of SX3/X4+ videos I found on youtube:

[ame="http://www.youtube.com/watch?v=INFl1Uv3A1c"]YouTube - Syil X4 Plus - Cut Demonstration[/ame]
[ame="http://www.youtube.com/watch?v=MQTWj3WPapM"]YouTube - Cutting 304 Stainless with a Syilamerica X3[/ame]
[ame="http://www.youtube.com/watch?v=5nkNKnlwyjQ"]YouTube - Syil X3 Profile Cut Aluminum Bracket[/ame]

etcetera.

The idea is to show potential customers why the X6 is better than others, so you will need to show faster and deeper cuts. Take your time, get a decent camera capable of making videos (almost all these days) and publish them.


Pablo

[Gumby]

I'm with peu, you definitely need better videos.

Also why on earth would you only have a 3500rpm spindle on this machine?!?!?!?!?! get some better bearings in it and change the reduction to allow at least twice that number! The primary end mills used on machines this small is most likely 1/4" - 3/8" or smaller. I can honestly say I would not buy your machine because of the limited spindle rpms...

[ataxy]

first thing first they should yes change there motor for a faster one and also they should definitly higher a north american or european machinist to check what there ''enginner'' are planning... all milling machine should do something in the range of 0 to 6000 rpm.

sorry syil if this sounds harsh it is not my style to be harsh but i currently feel a bit harsh toward....!!!!!!