584,871 active members*
5,221 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Uncategorised MetalWorking Machines > Hitachi Seiki Service and Support!!!!!!!!1
Page 1 of 10 123
Results 1 to 20 of 206

Hybrid View

  1. #1
    Join Date
    Nov 2004
    Posts
    36

    Exclamation Hitachi Seiki Service and Support!!!!!!!!1

    Hello all out there lost in the confusion of trying to find support for your Hitachi Seiki machines. I own a CNC Service Company in Wichita Kansas working on all brands of machines, but specializing in Hitachi Seiki. I currently have over 10 gig of info on Hitachi Seiki machines in my database from machine software to procedures and ELECTRICAL MANUALS!!!!! I have years of experience working with these machines, and until June of 04 I worked for Mori Seiki in LA as the Hitachi Seiki specialist. We DO travel, and my hourly rate for shop labor is only $75.00 per hour no matter what state your in. I also do phone support and provide procedures at $45.00 per hour 1 hour min....If you have a Hitachi Seiki machine, other machine models welcome also, call us and we will be happy to help!!! (cureing your headaches is free!!)

    You can contact us at 316-744-0549 just ask for Josh, aka Hitachi_man

    well be looking forward to hearing from you!!!

  2. #2
    Join Date
    Mar 2005
    Posts
    5
    Hi Hitachi Seiki_Man
    I Have Hitachi Seiki Va 40 Can You Help Me Look For Manual.
    I live in orange county california
    Thank You

  3. #3
    Join Date
    Nov 2004
    Posts
    36

    Manual

    What controls?

  4. #4
    Join Date
    Mar 2005
    Posts
    5
    Hitachi Seiki va 40
    Fannuc 6m control.
    If you are still in LA let me know so I can contac you for service

    Thank you

  5. #5
    Join Date
    Nov 2004
    Posts
    36
    I'm in the midwest now. your machine have the Micon 8-1 or 8-2?

  6. #6
    Join Date
    Mar 2005
    Posts
    5
    Hi,hitachi_man
    How do i know which is 8-1 or 8-2?

    Thanh You

  7. #7
    Join Date
    Jan 2010
    Posts
    13
    i think my machine had micon 8-1. can you plz told me about the diffenerce between micon 8-1 and micon 8-2

  8. #8
    Join Date
    Nov 2004
    Posts
    36
    It's on the edge of the board, it will say micon 8-1 or micon 8-2.

  9. #9
    Join Date
    Mar 2005
    Posts
    5
    It's micon 8-2.

  10. #10
    Join Date
    Nov 2004
    Posts
    36
    What manuals are you looking for? I'll see if I have them.

  11. #11
    Join Date
    Nov 2003
    Posts
    17

    how to reset magazine sync

    HG 400III with Seicos 10M control. Tool mag is out 5 pots. How can I reset? :cheers:
    Kirk

  12. #12
    Join Date
    Nov 2004
    Posts
    36
    That machine should have the Micon 16 front end, to reset the tool pot you need to go into the system table and do it there. Press F1 > F4 and that will take you into the AB-Phase table. Change your pot numbers there and reboot the machine. That should take care of it.

  13. #13
    Join Date
    Oct 2006
    Posts
    2

    Hitachi Seki VM50

    Hello,
    One of customer has bought a second hand Hitachi seki vm50 super productive vertical machining centere from a trader , with out any manuals.
    We are able to power up the machine, but with alarms like AXIS OVER TRAVEL +-, 801 PC LADER SUM CHECK ERROR , 742 EDITING THE PROGRAME, ETC..

    THE SYSTEM IS A SEICOS LAMBDA 10M, WITH NEC DRIVE AND FANUC MOTORS.

    DO YOU THIS MACHINE MANUALS AND PROCEDURE FOR CLEARING THESE ALARMS?
    IF SO PLEASE SEND ME A MAIL.

    D.JOHNSON.
    00919444029066.
    INDIA

  14. #14
    Join Date
    Jul 2007
    Posts
    1

    Hitachi Seiki Minimatic Service and Support !!

    I am trying to locate "Josh" AKA Hitachi_man from this Nov 2004 post.... or anyone else with equivalent experience that may be able to provide phone support specifically for a Hitachi Seiki MN 500, Horizontal Machining Center "Minimatic" with Fanuc 6M control.

    We are having trouble with the tool changer. We're located in Columbus, OH and we're also interested in developing a relationship with an experienced Hitachi Seiki repair-person who would be able to travel to our location.

    Please contact us via phone or email (We do not check this forum regularly)

    dstacey[at]columbusmachine[dot]com
    614-409-0244

  15. #15
    Join Date
    Dec 2010
    Posts
    0
    Quote Originally Posted by Hitachi_man View Post
    What manuals are you looking for? I'll see if I have them.
    http://www.cnczone.com/forums/cnczon...tml#post859371

  16. #16
    Join Date
    Aug 2007
    Posts
    138
    VK45 Seicos II diameter offsets are stored in the same table as your length offsets. I guess that is why Hitachi gave us more offsets than tools.

    example:
    tool 1 length offset stored in offset position 1
    tool 1 diameter offset stored in offset position 2

    .
    .
    .
    T1 M6
    G43 H1;
    G41 H2;
    .
    .
    Hope that helps

    Dan

  17. #17
    Join Date
    Dec 2009
    Posts
    1
    hi hitachi man,
    i have HG630 HMC MODEL 1996.
    I WANT SPARE FOR POWER SUPPLY BOARD CHIP.
    CAN YOU HELP ME?

    KARTHIK

  18. #18
    Join Date
    Aug 2005
    Posts
    128
    Can anyone help with hitachi seiki vm40 errors?

    bubble alarm and I am getting machine alarm which is general alarm I think.
    Also a few parameters and 5097 cutting monitor alarm and 5117 N/c unit selector alarm.

  19. #19
    Join Date
    Nov 2004
    Posts
    36

    Phone number change!!!

    Phone number change....[QUOTE=Hitachi_man]Hello all out there lost in the confusion of trying to find support for your Hitachi Seiki machines. I own a CNC Service Company in Wichita Kansas working on all brands of machines, but specializing in Hitachi Seiki. I currently have over 10 gig of info on Hitachi Seiki machines in my database from machine software to procedures and ELECTRICAL MANUALS!!!!! I have years of experience working with these machines, and until June of 04 I worked for Mori Seiki in LA as their Hitachi Seiki specialist. We DO travel, and my hourly rate for shop labor is only $75.00 per hour no matter what state your in. I also do phone support and provide procedures at $45.00 per hour 1 hour min....If you have a Hitachi Seiki machine, other machine models welcome also, call us and we will be happy to help!!! (curing your headaches is free!!)

    You can contact us at 316-260-6090 just ask for Josh, aka Hitachi_man

    well be looking forward to hearing from you!!!

  20. #20
    Join Date
    May 2006
    Posts
    1

    Pallet Changer Alarm! VM50

    Good morning Josh/Hitachi Man,

    I have a vm50 with Seikos Alpha10M Control (equiped with dual pallet changer). I'm missing a Programing Manual and Instruction Manual for Optional Functions. Machine seems to be running okay except for swapping pallet. I keep having these alarms when commanding M60.

    [2AC7] Transfer Ready Indication Incomplete
    [2AD1] Pallet Position Pin in Abnormal

    I'm not sure if we had the pallet changer hooked up right because the "APC Ready" Push Button/Light never came on during the whole time and I don't know how to "Origin APC". There's a green LED flashing all the time in APC controller box (bellow/behind the pallet changer).

    We're able to MDI the APC door open, Unclamp table (which raised the table up) but unable to dock the table to its place.

    I'd like to buy above mentioned Manuals (either printed copies or PDF files) from you and need your help walking us thru solving this problem. I'll have my friend Shane (he helps setting up the machine) give you a call today. We are in Oregon.

    Thank you

    Chi Dang

Page 1 of 10 123

Similar Threads

  1. Did Mori Seiki Buy Hitachi Seiki?
    By Billet Sean in forum Mori Seiki lathes
    Replies: 6
    Last Post: 05-05-2011, 04:12 AM
  2. Hitachi Seiki Parts, Support and Manuals
    By npkaye in forum News Announcements
    Replies: 4
    Last Post: 03-09-2011, 12:16 PM
  3. HITACHI SEIKI MACHINES. SERVICE / TECH
    By bob1112 in forum Uncategorised MetalWorking Machines
    Replies: 6
    Last Post: 09-14-2010, 04:49 PM
  4. Hitachi Seiki tech network - support
    By bob1112 in forum Uncategorised MetalWorking Machines
    Replies: 1
    Last Post: 12-29-2008, 10:26 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •