[hansdie]

I need a copy of the PLC off a Bridgeport Interact TNC151B machine. So if anyone has a copy or a machine where they can download the PLC it would really help me out.
Thanks

[machintek]

I do not know if that is possible.
If you know how, please post the procedure so it can be done for you.

George

[hansdie]

I do not know if that is possible.
If you know how, please post the procedure so it can be done for you.
George

1. power on the machine
2. hit MOD key until it asks for password
3. enter password 807667 -> ENT
4. choose edit PLC ->ENT
5. hit EXT key
6. if it asks for PLC to input press NOENT
7. put any name ie "123" then ->ENT
8. send to me...thank you

[gridley51]

It can be done as Handsie points out,but it also depends on a parameter whether the control looks at the plc programme on the eprom that Heidenhain burnt according to the MTB specs or whether it uses the generic plc programme issued with the control.The generic programme can be edited or rewritten by the user.Heidenhain`s website has a very good manual on writing the plc programmes for these controls.FOC for download.Obviously if you don`t know what you are doing it would be better to leave well alone.