585,949 active members*
3,989 visitors online*
Register for free
Login

Thread: GE 1050 mark century N17 error

Results 1 to 4 of 4
  1. 01-21-2009, 05:23 AM #1
    eastpaman
    eastpaman is offline Registered
    Join Date
    Jan 2009
    Posts
    2

    Question GE 1050 mark century N17 error

    I have problem with loading my program in the 1050.I have tried shorting my cable,a different computer to send it I still get a N17 error-Parity flag fails to clear
    Reply With Quote Reply With Quote
  2. 01-21-2009, 06:52 AM #2
    WGoyer
    WGoyer is offline Registered
    Join Date
    Aug 2008
    Posts
    151

    1050 Problem

    Do you know which model it is: T, MC, H, HL, MCL? What machine is it on?

    Warren

    www.uptimecorp.com
    Reply With Quote Reply With Quote
  3. 01-21-2009, 01:14 PM #3
    eastpaman
    eastpaman is offline Registered
    Join Date
    Jan 2009
    Posts
    2
    1050H on a strippit
    Reply With Quote Reply With Quote
  4. 01-21-2009, 03:42 PM #4
    WGoyer
    WGoyer is offline Registered
    Join Date
    Aug 2008
    Posts
    151

    1050H

    I guess I would get a little RS-232 tester to put in the line and watch the lights. Punching something out would be a good first test.

    Assuming that nothing has changed on the computer end (baudrate, stop bits, parity etc.) it sounds like it might be a hardware problem.

    It has been a long time since I worked on an H, but I seem to remember that the cable jumpers select the baudrate. If so, it might be time to open up the connector and check for broken jumpers.

    Warren

    www.uptimecorp.com
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. GE mark century 2000 drip feeding
    By ncmas in forum DNC Problems and Solutions
    Replies: 5
    Last Post: 10-11-2011, 12:56 PM
  2. Mark Century 2000 Dnc Problem
    By ozgurm in forum DNC Problems and Solutions
    Replies: 5
    Last Post: 02-18-2009, 06:22 AM
  3. 1050 MC Reversal Error Comp.
    By smts in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 0
    Last Post: 10-28-2008, 09:34 PM
  4. Code generator for Monarch VMC75/Mark Century 2000
    By grweldon in forum EdgeCam
    Replies: 0
    Last Post: 03-31-2008, 04:55 PM
  5. Century 82050 Question
    By meerkatguy in forum Waterjet General Topics
    Replies: 4
    Last Post: 11-15-2006, 09:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules