[beerdrinker301]

I need a simple part that consists of a 1/2 thk aluminum plate (6061-t6, cast aluminum jig plate, or eqiuv) that is roughly 18"x15". There are 16 counterbored holes for cap screws. I was going to do this myself but did not want to take a chance with the hole locations.

I've attached a drawing for the part, let me know if further information is needed. Please quote one piece and shipping to tonawanda, NY 14150. Thanks.

[Runner4404spd]

send print to [email protected]

[Zeke13]

I don't see the attached print.

[beerdrinker301]

ok, now the print should be attached.

[67chevym]

please send print to,
[email protected]

[eScott]

Are you providing the material?

[67chevym]

i can 6061 alum material on hand,

[deanrach]

Check your PM's.

[Drake75]

I'm sure I can have the work done for you a fair price.
Sound simple enough but I couldn't see your print.
Please e-mail it to me at [email protected] or [email protected] .

I look forward to hearing from you.

[functionbikes]

can you forward me the dwg file for this and a delivery shedule
to [email protected] and will shoot you a cost for the part with a quick turnaround time


Jeremy little
ogd manufacturing
ogden, ut,84401