[MadMan5000]

The controller is Fenuc General numeric GNIO series. My manuals are missing the G & M code pages. Where can I obtain a copy?? I worked with a Takasawa with a different version controller but it has the same exact screen and menues. It only used a single can cycle line as aposed to a 2 line:
1 LINE:
G72P100Q200U0W0D150F150
2 LINE
G72Q.015R.02
G72P100Q200U0W0F.015

Whitch would I use on this machine??

What I realy need is the tap and drill cycle codes and how you would structure the line. Would it be the same as a mill??

Thanks

Allen

[cweiss]

If your manual is really beat up, Hardinge will mail you one for around $50 for the operator/programmers manual. All of the documentation for your serial number is available from them. Even the original electrical diagrams.

Good luck.