506,007 active members
4,214 visitors online
Register for free
Login
Page 17 of 17 7151617
Results 193 to 196 of 196
  1. #193
    Registered
    Join Date
    Sep 2009
    Posts
    1
    As far as using a camera system, it would help for alignment purposes. Even if the system was only setup with a cross hair for "manual" alignment. If you use a camera, keep in mind that your software would need to be setup for an offset between camera and the center of placement tool. In this instance you place something then jog the camera with your cross hairs to the center of what was placed to create a quick camera to tool offset. This offset would need to happen each time the machine is powered down and re-started...depending on the equipment maybe each time you change your board.

    That is something to keep in mind with using a camera system. I can offer other pieces of advice given worked and still work with many SMT placement machines, stencil printers, reflow ovens, selective waves, adhesive dispensing etc..

  2. #194
    Registered
    Join Date
    Sep 2009
    Posts
    119

    Homemade Pick and Place

    Just found this thread and wanted to give everybody watching it a heads up. There is another thread discussing CNC/PnP conversion and I posted some videos of my machine there a couple days ago. Here's the link.

  3. #195
    Registered
    Join Date
    Oct 2006
    Posts
    461
    For those interested, I've started building my pick and place machine.

    I'm posting picture updates in this thread
    http://www.cnczone.com/forums/showthread.php?t=97551
    Attached Thumbnails Attached Thumbnails eclipze_pick_n_place_01.jpg  

  4. #196
    Member
    Join Date
    Sep 2019
    Posts
    1
    Hi!

    While searching for pick and place machines on google, I just found this thread. First of all, I want to thanks everybody for providing a lot of useful information here.

    I'm just tired of outsourcing, so I decided to purchase a dedicated machine, but I don't have a fortune to spend on it.

    Since nobody mentioned Neoden in this thread, I'll mention them https://neodenusa.com/smt-pick-and-place. Their prices are a little bit lower compared with others. Did anyone had any experience with them so far? Any information would be more than welcome.

    Thank you all!

Page 17 of 17 7151617

Similar Threads

  1. pick and place controller design
    By lurch in forum Open Source Controller Boards
    Replies: 2
    Last Post: 04-12-2005, 04:44 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •