540,317 active members*
721 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Hyundai Kia > Hyundai HIT 15s/error 9161
Results 1 to 7 of 7
  1. #1
    Registered
    Join Date
    Jan 2009
    Posts
    1

    Hyundai HIT 15s/error 9161

    Hello, i am trying to troubleshoot a 9161 (machine not ready) alarm on startup. I've followed the fault tree and even replaced a thermal 24vdc contactor in the circuit, but still no help.

    If anyone has ever had this alarm in the past, what steps did you take to correct? Also, if any available documentation, that would be helpful too.
    Thanks
    Andy

  2. #2
    Registered
    Join Date
    Jul 2006
    Posts
    20
    Andy,

    Probably not much help but my book says:
    Cause: No "machine ready signal" or "hydraulic on" signal.
    Action: Check breaker QFB2, QFB3 and thermal relay QFB6.
    Check the "machine ready signal" and connections.
    Check the magnetic contact and thermal relay of hydraulic pump motor.

    Afraid that is about all the help I can offer. If you have found a solution, please post for the rest of us.

    Ken

  3. #3
    Registered
    Join Date
    Aug 2008
    Posts
    69

    Re: Hyundai HIT 15s/error 9161

    I just got this error too. It is not listed in my book. What manual are you looking in that lists it and shows a trouble tree? I need to get that book.

  4. #4
    Registered
    Join Date
    Aug 2008
    Posts
    69

    Re: Hyundai HIT 15s/error 9161

    Fixed, at least for now. Pressed a reset button on the keyboard circuit board under the monitor. Now we see it it happens again.

  5. #5
    Registered
    Join Date
    Jul 2006
    Posts
    20

    Re: Hyundai HIT 15s/error 9161

    Quote Originally Posted by BNR_RANDY View Post
    Fixed, at least for now. Pressed a reset button on the keyboard circuit board under the monitor. Now we see it it happens again.
    My original post is about all the help I can offer. Its from the instruction manual that came with the lathe.

    Ken

  6. #6
    Registered
    Join Date
    Aug 2008
    Posts
    69

    Re: Hyundai HIT 15s/error 9161

    which book is that? Title, publication number? Is it a Hyundai or a Siemens book? Mine books do not have this error in them.

  7. #7
    Registered
    Join Date
    Jul 2006
    Posts
    20

    Re: Hyundai HIT 15s/error 9161

    Quote Originally Posted by BNR_RANDY View Post
    which book is that? Title, publication number? Is it a Hyundai or a Siemens book? Mine books do not have this error in them.
    Again, it is the instruction manual that came with the lathe. The manual has 9 books and one of the books lists the alarm codes. The alarm code book has the following info:

    Hyundai 1996 All Rights Reserved
    Subject to change without prior notice

    Page No. : 2-39
    Rev No. : 2(9612)
    Book No. : Z99HP110100

    If you need the latest revision you can call the Operation Center of
    Hyundai Precision or Regional Office

    Please send request to
    Hyundai Precision & Ind. Co., Ltd
    Operations Center
    1162 Tower Lane
    Bensenville, IL 60106
    Tel 7089-596-4587
    Fax 708-595-0697

    This information is from 1996 so its validity is questionable.

    Ken

Similar Threads

  1. hyundai hit 8
    By drill in forum General MetalWork Discussion
    Replies: 5
    Last Post: 09-10-2012, 01:17 AM
  2. hyundai hi t 8
    By Cartel, LLC in forum Hyundai Kia
    Replies: 4
    Last Post: 02-08-2012, 12:07 AM
  3. hyundai 18s
    By protoman1 in forum Hyundai Kia
    Replies: 1
    Last Post: 02-07-2012, 11:48 PM
  4. Hyundai HIT 15S
    By lesarcs in forum Hyundai Kia
    Replies: 0
    Last Post: 12-28-2011, 10:44 PM
  5. Hyundai VMC
    By kevinkoons in forum Hyundai Kia
    Replies: 1
    Last Post: 03-30-2009, 06:27 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •