[Chriss F]

I have a tree J300 with camsoft lite and there retro fit. I am looking for a hand wheel pendant that will work with the software. I found this one on line after some searching it's a kelinginc. Does anyone know if it will work with what I have? Or is there another one out there that will other than the ones camsoft offers? Thanks

Chris

[camsoft]

Chris,

We have 4 models of pendants that come with a pre-mounted hand wheel.

There's a new one not posted on our web-site that will be released this later this month.

If you're interested, we will send you a list of them with photos and pricing including the new one if you shoot us your e-mail to:

Tech Support
CamSoft Corp.
[email protected]
PH 951-674-8100
Fax 951-674-3110
www.cnccontrols.com

[Chriss F]

here is the link to the hand wheel www.kelinginc.net/BreakoutBoards.html. I'll e-mail it to you also let me know. Thanks for getting back with me so quick.

Chris

[Karl_T]

here is the link to the hand wheel www.kelinginc.net/BreakoutBoards.html. I'll e-mail it to you also let me know. Thanks for getting back with me so quick.

Chris

That's a standard quadrature handwheel. It will work just fine. I'd be a bit cautious about the entire pendant. The dials might be OK. It would be difficult to correctly connect that Estop.

Karl

[Chriss F]

As long as i can pick what axis and how fast thats I'll I'm really going to need an e-stop would be nice but I can live without it. Thanks for the info.