I am drawing a lathe part in mastercam, I was wondering if thier is anyway, to import a jpeg picture and set it in the back ground while I am drawing lines..
It would make life so much easyer...
Thank you for your time.
Results 1 to 3 of 3
-
02-07-2009, 04:32 PM #1
Registered
- Join Date
- Sep 2007
- Posts
- 35
Import simple image in to Mastercam?
-
02-07-2009, 07:18 PM #2
Registered
- Join Date
- Jan 2008
- Posts
- 123
You need some type of raster to vector program Mastercam has a Raster2 Vector C-Hook but anything before X3 you need to buy a licsense for it
-
02-08-2009, 12:21 AM #3
Registered
- Join Date
- Mar 2006
- Posts
- 1013
Check out the shareware sites like doenloads.com and search for Raster to Vector. You want something that will make a DXF file.
Or if you have X3 it's already in there
Mike Mattera
Mike MatteraTips For Manufacturing Training CD's, DVD's for Mastercam, SolidWorks, Inventor, G-Code Training & More
http://www.tipsforcadcam.com
Reply With QuoteSimilar Threads
-
how to import to from solidworks to mastercam
By cob in forum MastercamReplies: 16Last Post: 10-12-2011, 11:35 AM -
Import image into Rhino
By Dmac252 in forum Rhino 3DReplies: 6Last Post: 11-17-2008, 10:56 AM -
mach2 jpg image file import freezes every time!
By nate in forum Mach MillReplies: 3Last Post: 01-29-2008, 11:37 PM -
mach 2 import image
By gilligan in forum Machine Created ArtReplies: 3Last Post: 11-23-2006, 12:22 AM -
Simple Question Simple Answer ?
By p3t3rv in forum Stepper Motors / DrivesReplies: 6Last Post: 02-16-2006, 04:00 PM
Posting Permissions
