I'"m hoping someone can help me with my problem I just purchased a 88 Dah-lih machining center and I"m having trouble getting it to download from smartcam does anyone have a control manual for the Fanuc 10m control or can they tell me the best software to use so I can download Smartcam into this control I can transmit from the machine to the computer but it comes out as giberish I set the baud and data bits acording to the manual I have but it covers several fanuc controls and the book is not exactly like the 10m control I've tried terminal and hyperterminal but it doesn't work Thanks to all that will try to help me
Wayne