Good morning,
I am looking for the code to get my tailstock to move. I have a Takisawa EX-108. According to the book, the forward movement would be M28 and rearward would be M29. Quill movement would be M10 & M11.
I have entered the M28 in my program but nothing happens. Am I missing a step? I also get an error M,S,T, etc has not been completed when I go to next block. I am running my program single block to check program.
Any help would be greatly appreciated.
Thank you,
Ardis
Results 1 to 2 of 2
-
02-12-2009, 08:22 PM #1
Registered
- Join Date
- Jan 2008
- Posts
- 282
Getting CNC lathe tailstock to move
-
02-12-2009, 11:02 PM #2
Registered
- Join Date
- Sep 2008
- Posts
- 199
Please don't take this wrong, but are sure your tailstock is "powered"? Does it have motors connected to it? I just know my machine can have a powered tailstock but doesn't and maybe someone misinformed you. Otherwise I'd just try a machine reset.
-JWB
--We Ain't Building Pianos (TCNJ Baja 2008)
Reply With QuoteSimilar Threads
-
Bridgeport Romi Lathe Tailstock Adjustment
By Riverside192 in forum Uncategorised MetalWorking MachinesReplies: 1Last Post: 04-27-2009, 11:39 PM -
Looking to buy a CNC lathe w/ tailstock
By Buildm1 in forum Want To Buy...Need help!Replies: 3Last Post: 12-15-2008, 07:10 PM -
Drilling on Lathe without tailstock
By NJC in forum MetalWork DiscussionReplies: 3Last Post: 11-07-2008, 03:55 PM -
Mini-Lathe Tailstock Chuck Alignment
By bowentw in forum Mini LatheReplies: 13Last Post: 12-06-2006, 09:24 PM -
Q: Mini lathe Tailstock Alignment?
By Deviant in forum Mini LatheReplies: 5Last Post: 08-20-2006, 01:25 AM
Posting Permissions
