584,802 active members*
4,902 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Feb 2009
    Posts
    1

    stirling plans

    Hi all,
    does anyone have plans for a simple low temp stirling (not tin can). I can't seem to find any decent, readable or complete plans on the web. I have built a steam engine which worked fine and 2 stirlings which didn't work at all.
    About ready to give up and put my lathe to other uses.

  2. #2
    Join Date
    Feb 2006
    Posts
    23
    Check out this page: Steam Engine of Australia.

    There is a fairly detailed description of the manner in which they make a LTD Stirling engine. Here is a picture of the engine described.

    Deferr
    http://stirlingenginehome.x10hosting.com

  3. #3
    Join Date
    Apr 2011
    Posts
    0
    Hi all,
    does anyone have plans for a alpha and beta stirling engine???

    my email: [email protected]

Similar Threads

  1. Finished my Stirling engine
    By Ubarch in forum MetalWork Discussion
    Replies: 3
    Last Post: 01-04-2006, 05:30 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •