I had a collision last week that ended up tightening the nut on my ER11 tool holder to the point I can't get it off. Unfortunately everything I know about tools I learned from google and I'm wondering if there is a device that holds the taper part of a tool holder while I use the spanner on the nut.
Results 1 to 3 of 3
-
02-24-2009, 08:26 PM #1
Registered
- Join Date
- Apr 2006
- Posts
- 5
Hold to hold tool holder while loosening nut
-
02-24-2009, 09:36 PM #2
Member
- Join Date
- Aug 2005
- Posts
- 1622
There are bench mounted tool tighteners. That being a small holder, just guessing, but here is one example.
30 Taper Bench mount fixture
DC
-
02-24-2009, 10:15 PM #3
Registered
- Join Date
- Sep 2004
- Posts
- 209
Most CAT or BT style blocks won't work for your tool holder because your tool holder doesn't have slots for keys to sit into (shown here). Instead, it looks like you need a spanner to go into the holes near the bottom of the taper.
I would contact the tool manufacturer; they might stock such a unit. Otherwise, you will be stuck making one.
Chris Kirchen
Reply With QuoteSimilar Threads
-
Hold Down
By thebaconbits in forum CamasterReplies: 6Last Post: 05-13-2012, 02:18 AM -
vac hold down
By woodman08 in forum Commercial CNC Wood RoutersReplies: 1Last Post: 11-19-2007, 01:47 AM -
How do you get a hold of one cnc?
By turboboy in forum OneCNCReplies: 8Last Post: 01-03-2007, 01:50 PM -
Material hold
By gabi68 in forum DIY CNC Router Table MachinesReplies: 7Last Post: 10-20-2006, 11:52 PM -
How to hold
By MIKEB in forum Work Fixtures / Hold-Down SolutionsReplies: 12Last Post: 09-05-2005, 02:50 AM
Posting Permissions
