509,959 active members
4,841 visitors online
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Registered
    Join Date
    Feb 2009
    Posts
    4

    eia toolchange issues

    I know we have good code, I've even run to my old employer and ran there posts on my machine which is exactly the same control? We have an older Mazak M2 Control, It reads the H value, but automatically on start up it goes to T00 instead of T01? But it reads the t01 H value, but not the t01 m06? Just curious while I work with this if anybody has any insight as the service techs on controls are gone for the day at Mazak?

    Thanks

    Nestor

  2. #2
    Registered
    Join Date
    Feb 2009
    Posts
    4

    update

    So if I take the t01 m06 line out of the code, and just manually load the tool in advance it will just take the tool that is in the spindle and read the H value and run just fine.....??? Problem most of my programs that I run are 20 tools and run for days on end till they are done, so this causes issues as I can only run one tool at a time then have to manually switch tools and load a new program for the next tool..... Any thoughts or idea's would be extremely helpful, my only thought is it has to be something in the Parameters?

    Nestor

  3. #3
    Registered
    Join Date
    Dec 2007
    Posts
    300
    Post a sample of this code

  4. #4
    Registered
    Join Date
    Jun 2007
    Posts
    2

    Looking for CNC fabricator

    Hello,
    I'm not sure where to post this, but I am looknig to have some 32mm cabinet parts cut in Nashville,TN
    can anyone help me?

Similar Threads

  1. HURCO MB1 TOOLCHANGE ERROR
    By bkstout in forum Machine Problems, Solutions , Wireless DNC, serial port
    Replies: 0
    Last Post: 02-15-2009, 02:26 AM
  2. 42/25 toolchange !!
    By mark1969 in forum Fadal
    Replies: 3
    Last Post: 01-08-2009, 03:51 PM
  3. Question on Toolchange
    By SpeedsCustom in forum LinuxCNC (formerly EMC2)
    Replies: 2
    Last Post: 09-29-2008, 02:57 PM
  4. Force toolchange ???
    By Lval in forum EdgeCam
    Replies: 5
    Last Post: 04-28-2008, 08:33 AM
  5. Ingnore toolchange
    By ORguitar in forum Mach Mill
    Replies: 9
    Last Post: 01-27-2008, 07:01 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •