548,545 active members*
2,250 visitors online*
Register for free
Login
IndustryArena Forum > OpenSource CNC Design Center > Open Source Controller Boards > YAPSC:10V : The glue between Step/dir and +/-10V servo amp
Page 13 of 13 3111213
Results 241 to 258 of 258
  1. #241
    Registered
    Join Date
    Sep 2016
    Posts
    31

    Re: YAPSC:10V : The glue between Step/dir and +/-10V servo amp

    Hello Lucas

    Your PM settings won't allow me contact you directly. Just wondering if you ever got any further with your YAPSC - type converter.

    Quote Originally Posted by lucas View Post
    There"s some further testing needed, I will publish schematics etc.. when everything works as it should .

    This design is compatible with Max's PCB (connector pinout) but has some changes and improvements, well I consider these as improvements :-)

    - a real RS422 receiver is used for the encoder: 26LS32, capable of differential and single ended encoders and with proper line termination for high speed.
    - works on a single supply: 8 to 24Vdc, + and - 12V are generated by a DC-DC converter.
    - encoder can be connected with a DB9 or screw terminals.
    - stp/dir/enable inputs have optocouplers and can be connected using a PMinmo style flatcable or screw terminals
    - The progkey is compatible, this or Max's version can be used on both designs

    I have 9 PCB"s left now for some beta-testers.

    One thing might change: the drive error input and Yapsc error output, this is very basic now and might need improvement to support more models of analog drives.

    Please send me a PM if you"re interested.

  2. #242

    Re: YAPSC:10V : The glue between Step/dir and +/-10V servo amp

    Quote Originally Posted by Tripet View Post
    Hello Lucas

    Your PM settings won't allow me contact you directly. Just wondering if you ever got any further with your YAPSC - type converter.
    David

    Lucas has not been involved with the YAPSC for some years due to time constraints.

    He walked away from the project at around the time I was looking at them that's why I looked into getting the boards printed myself.

    Andy

    Sent from my SM-G920F using Tapatalk

  3. #243
    Registered
    Join Date
    Sep 2016
    Posts
    31

    Re: YAPSC:10V : The glue between Step/dir and +/-10V servo amp

    Quote Originally Posted by audioandy1762 View Post
    David

    Lucas has not been involved with the YAPSC for some years due to time constraints.

    He walked away from the project at around the time I was looking at them that's why I looked into getting the boards printed myself.

    Andy

    Sent from my SM-G920F using Tapatalk
    Thanks Andy.

    Looks like the YAPSC project is dead then - what a shame.

    David

  4. #244
    Registered
    Join Date
    Nov 2006
    Posts
    4

    Re: YAPSC:10V : The glue between Step/dir and +/-10V servo amp

    I think I've got 3 or 4 YAPSC boards sitting around somewhere, just populated with the uController. If anyone would like them, let me know.

  5. #245
    Registered
    Join Date
    Nov 2006
    Posts
    4

    Re: YAPSC:10V : The glue between Step/dir and +/-10V servo amp

    Quote Originally Posted by evguru View Post
    I think I've got 3 or 4 YAPSC boards sitting around somewhere, just populated with the uController. If anyone would like them, let me know.
    Boards now sold.

  6. #246
    Registered
    Join Date
    Aug 2016
    Posts
    6

    Re: YAPSC:10V : The glue between Step/dir and +/-10V servo amp

    please I want to buy the boards yapsc10.. please good price send me information.

    fabatecperu@gmail.com

  7. #247
    Registered
    Join Date
    Aug 2016
    Posts
    6

    Re: YAPSC:10V : The glue between Step/dir and +/-10V servo amp

    how it works this board?. I need 3 for a old cnc machine that have dc servomotors. I want to control the machine with mach3 or linux. your product is ok for this application?.. please give me good price. Im from Peru.

    fabatecperu@gmail.com

  8. #248
    Registered
    Join Date
    Apr 2003
    Posts
    8

    Re: YAPSC:10V : The glue between Step/dir and +/-10V servo amp

    anybody have any of these boards available to purchase

  9. #249
    Registered
    Join Date
    Oct 2009
    Posts
    5

    Re: YAPSC:10V : The glue between Step/dir and +/-10V servo amp

    I have three boards, two fully soldered (one did not tested) and one only with dsPIC soldered. Please let me know if you are interested. sla@inbox.lt

  10. #250
    Member
    Join Date
    Jan 2005
    Posts
    13137

    Re: YAPSC:10V : The glue between Step/dir and +/-10V servo amp

    Quote Originally Posted by muale View Post
    anybody have any of these boards available to purchase
    I have ( 1 ) and the USB Prog Key programmer New and unused YAPSC:10v that was made by MaX-MoD the original maker of this board, you can PM me if you are interested in it
    Mactec54

  11. #251
    Registered
    Join Date
    Jan 2005
    Posts
    364

    Re: YAPSC:10V : The glue between Step/dir and +/-10V servo amp

    Hello,

    it has been a long time since my last post, I didn't have the spare time required.

    There are still some boards and components available.

    PM doesn't work so please contact me using the "contact" button on my website, see below.

    Regards,
    Luc.
    Open source CNC electronics and accessories:
    http://users.skynet.be/ldt/CNC%20electronics/THB6064AH.html

  12. #252
    Registered
    Join Date
    Jan 2006
    Posts
    15

    Re: YAPSC:10V : The glue between Step/dir and +/-10V servo amp

    Hi all,

    Can anyone give me a working link to the YYT software please? I'm also looking for available PCB/complete boards.
    Thank you.

  13. #253
    Registered
    Join Date
    Jan 2005
    Posts
    364

    Re: YAPSC:10V : The glue between Step/dir and +/-10V servo amp

    Quote Originally Posted by technik View Post
    Hi all,

    Can anyone give me a working link to the YYT software please? I'm also looking for available PCB/complete boards.
    Thank you.
    I have send you a PM.

    Regards,
    Luc.
    Open source CNC electronics and accessories:
    http://users.skynet.be/ldt/CNC%20electronics/THB6064AH.html

  14. #254
    Registered
    Join Date
    Jan 2006
    Posts
    15

    Re: YAPSC:10V : The glue between Step/dir and +/-10V servo amp

    Quote Originally Posted by lucas View Post
    I have send you a PM.

    Regards,
    Luc.
    Thank you Luc. I have sent you an e-mail.

  15. #255
    Registered
    Join Date
    Oct 2009
    Posts
    5
    Still have three board available

  16. #256
    Member
    Join Date
    Nov 2010
    Posts
    1
    Hello, i m gona make some boards yasp but with power source inside. If any one need sendme a pm.
    Hola, yo voy a hacer algunas tragetas yasp pero con fuente de poder interna, si alguien nesecita envienme pm.


    Enviado desde mi SM-J610G mediante Tapatalk

  17. #257
    Member
    Join Date
    Jul 2020
    Posts
    1

    Re: YAPSC:10V : The glue between Step/dir and +/-10V servo amp

    Hi all,

    Can anyone give me a working link to the YYT software please?

    Thank you.
    endre_95@yahoo.com

  18. #258
    Member
    Join Date
    Nov 2021
    Posts
    2

    Re: YAPSC:10V : The glue between Step/dir and +/-10V servo amp

    Quote Originally Posted by lucas View Post
    I have send you a PM.

    Regards,
    Luc.
    Good morning Lucas.

    I have an old cnc stopped. I have bought three YApsc 10v boards mounted and they don't work. I am convinced that it is the software.
    Do you have it?

    Kind regards
    Masmastermil

  19. #259
    Member
    Join Date
    Nov 2021
    Posts
    2

    Re: YAPSC:10V : The glue between Step/dir and +/-10V servo amp

    Hi everyone.
    I have found this.
    I'm going to try it ...



    http://cncdevice.pro/YAPSC/


    Kind regards.
    masmastermil

Page 13 of 13 3111213

Similar Threads

  1. Gecko PID step motor servo
    By Mariss Freimanis in forum Gecko Drives
    Replies: 116
    Last Post: 03-26-2015, 08:54 AM
  2. step motor or servo
    By dcutler35 in forum Uncategorised MetalWorking Machines
    Replies: 2
    Last Post: 06-09-2012, 06:18 PM
  3. Servo step multiplier
    By JerryFlyGuy in forum Servo Motors / Drives
    Replies: 8
    Last Post: 05-15-2007, 08:20 PM
  4. Units Per Step For Servo
    By bgolash in forum Mach Software (ArtSoft software)
    Replies: 1
    Last Post: 02-14-2006, 08:46 PM
  5. Servo and Step motors
    By Dre361224 in forum General CNC Machine Related Electronics
    Replies: 2
    Last Post: 06-09-2005, 02:33 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •