584,842 active members*
4,512 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Nov 2007
    Posts
    24

    Different depths w/ Ace Convertor

    Hi,

    I'm using A9CAD, which is 2D, and copy several dxf designs into a single file.

    When I use Ace Converter the resulting shapes in g-code are at different depths.

    I made sure that everything is on the same layer but they always come out with a different Z-axis value.

    Anyone have any ideas?

    Thanks

  2. #2
    Join Date
    Mar 2003
    Posts
    35538
    Can you post the .dxf?
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  3. #3
    Join Date
    Jan 2012
    Posts
    9

    Program Dsp deleted

    program dsp handel

    hi all
    i have machine cns " maxima " with dsp command the problem that i lose the program
    the all for DSP are delete , now when i put the usb result is , only scren is light and the red led is on
    you can see the photo of my dsp
    please some one can help me
    i ask my china supplier but until now i don't receive any information
    hope find a solution for this problem
    thanks and best regards
    Attached Thumbnails Attached Thumbnails SL740118.jpg  

Similar Threads

  1. Incremental Z Depths In Drilling
    By Litnin in forum Mastercam
    Replies: 5
    Last Post: 03-01-2012, 04:28 PM
  2. Cutting slots at various Z depths ??
    By jwknow in forum Haas Mills
    Replies: 1
    Last Post: 01-22-2009, 09:02 PM
  3. Setting depths in Lazycam
    By kenealym in forum Uncategorised CAM Discussion
    Replies: 6
    Last Post: 07-07-2008, 06:12 AM
  4. Z-finish Depths
    By jamesr in forum Surfcam
    Replies: 2
    Last Post: 12-20-2006, 07:07 PM
  5. Depths of cut on a lathe
    By M@T in forum Uncategorised CAM Discussion
    Replies: 4
    Last Post: 01-30-2004, 04:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •