584,808 active members*
5,362 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > PowerMILL > Postprocessor for OSAI
Results 1 to 5 of 5
  1. #1
    Join Date
    Feb 2008
    Posts
    3

    Postprocessor for OSAI

    Good Day All.

    This is my 1st post so I do hope this is the right place.

    I have worked on CMS Brembana machine with OSAI and Easy Stone software from DDX Group from ITALY but I would like to starting work with PowerMILL.

    So, I look for POSTPROCESSOR for OSAI to PowerMill (DELCAM) Software.

    Maybe, PowerMill has compatible postprocessors with OSAI.

  2. #2
    Join Date
    Jul 2009
    Posts
    5
    Hi collegue, I also use just start to use PowerMill for stoneworking, I use Emmedue Discovery and GMM Blizz (now on mounting).
    If G-code of you machine isn't very cmplicated i could cend you my post.

  3. #3
    Join Date
    Jul 2010
    Posts
    0
    Hi MFS

    Can you please send me your post processor to [email protected]

    Thanks

    Mahesh

  4. #4
    Join Date
    Feb 2011
    Posts
    252

    Re: Postprocessor for OSAI

    Hello,
    I have a postprocessor for SOLIDCAM.

  5. #5
    Join Date
    Jul 2014
    Posts
    39
    Hello
    I have an OSAI Series 10 , Vertical cnc machine , 5 Axis,
    XYZAC
    also it has a rotary B attached on his table
    can you send me any post for Alphacam or NX or MasterCam or PowerMill please.

Similar Threads

  1. Osai postprocessor for Solidcam
    By maparkopo in forum SolidCAM for SolidWorks and SolidCAM for Inventor
    Replies: 4
    Last Post: 11-14-2020, 01:27 PM
  2. osai winnbi
    By andy tebbutt in forum Controller & Computer Solutions
    Replies: 1
    Last Post: 01-13-2013, 09:34 PM
  3. OSAI 10 Info
    By gcoding in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 1
    Last Post: 01-10-2012, 11:38 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •