502,358 active members
4,860 visitors online
Register for free
Login
IndustryArena Forum > CAM Software > PowerMILL > Postprocessor for OSAI
Results 1 to 5 of 5
  1. #1
    Registered
    Join Date
    Feb 2008
    Posts
    3

    Postprocessor for OSAI

    Good Day All.

    This is my 1st post so I do hope this is the right place.

    I have worked on CMS Brembana machine with OSAI and Easy Stone software from DDX Group from ITALY but I would like to starting work with PowerMILL.

    So, I look for POSTPROCESSOR for OSAI to PowerMill (DELCAM) Software.

    Maybe, PowerMill has compatible postprocessors with OSAI.

  2. #2
    Registered
    Join Date
    Jul 2009
    Posts
    5
    Hi collegue, I also use just start to use PowerMill for stoneworking, I use Emmedue Discovery and GMM Blizz (now on mounting).
    If G-code of you machine isn't very cmplicated i could cend you my post.

  3. #3
    Registered
    Join Date
    Jul 2010
    Posts
    0
    Hi MFS

    Can you please send me your post processor to mahesgarg@gmail.com

    Thanks

    Mahesh

  4. #4
    Registered
    Join Date
    Feb 2011
    Posts
    252

    Re: Postprocessor for OSAI

    Hello,
    I have a postprocessor for SOLIDCAM.

  5. #5
    Member
    Join Date
    Jul 2014
    Posts
    21
    Hello
    I have an OSAI Series 10 , Vertical cnc machine , 5 Axis,
    XYZAC
    also it has a rotary B attached on his table
    can you send me any post for Alphacam or NX or MasterCam or PowerMill please.

Similar Threads

  1. UG NX5 postprocessor for OSAI 10 / 510 S - 5 axis
    By rodrigobr in forum Post Processor Files
    Replies: 1
    Last Post: 08-11-2019, 06:51 AM
  2. Osai postprocessor for Solidcam
    By maparkopo in forum SolidCAM for SolidWorks and SolidCAM for Inventor
    Replies: 3
    Last Post: 04-14-2014, 05:07 PM
  3. osai winnbi
    By andy tebbutt in forum Controller & Computer Solutions
    Replies: 1
    Last Post: 01-13-2013, 09:34 PM
  4. Need Postprocessor for AlphaCAM (CMS,OSAI controller)
    By Martynas2 in forum Post Processor Files
    Replies: 5
    Last Post: 08-16-2012, 11:12 PM
  5. OSAI 10 Info
    By gcoding in forum General CNC (Mill / Lathe) Control Software (NC)
    Replies: 1
    Last Post: 01-10-2012, 11:38 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •