Is anyone using a bluetooth to rs-232 adapterto send files and dnc files to their haas? If so is there any certain type that I should look into? And is there any problems that you have had with the setup?
Thread: bluetooth to rs-232 questions
Results 1 to 2 of 2
-
03-05-2009, 05:42 PM #1
Registered
- Join Date
- Mar 2009
- Posts
- 1
bluetooth to rs-232 questions
-
03-05-2009, 06:50 PM #2
Registered
- Join Date
- Sep 2005
- Posts
- 47
I use the ConnectBlue SPA312i bluetooth to RS232 controller - it is designed for industrial use and it works great. I attached it to my mill, and plugged it into the switched 115v power outlet, so it turns on when i turn on the mill. The antenna is on top. Now I have a 3500lb mobile bluetooth device
http://www.connectblue.com/products/...sings/spa312i/
They are pretty pricey new, but i bought mine on eBay for $100.
Absolutely no problems. configured for 115k communications.
Reply With QuoteSimilar Threads
-
CNC mill questions - thrust bearings, leadscrew mounting, general questions
By tonofsteel in forum DIY CNC Router Table MachinesReplies: 8Last Post: 02-03-2012, 10:42 PM -
Brass vs Aluminium Vs Steel, questions, questions and questions...
By alexccmeister in forum Uncategorised MetalWorking MachinesReplies: 25Last Post: 08-15-2011, 06:40 PM -
bluetooth!
By draughted in forum CNC (Mill / Lathe) Control Software (NC)Replies: 1Last Post: 10-10-2007, 07:48 AM -
USB Wireless Bluetooth on PC CNC Controls
By WayneHill in forum DNC Problems and SolutionsReplies: 4Last Post: 03-12-2007, 05:00 PM -
RS232 VIA bluetooth, Sucess.
By Loading in forum Haas MillsReplies: 2Last Post: 09-28-2006, 06:46 PM
Posting Permissions
