[cnc_Srky_cro]

Hello
I need help if someone can help me.
Recently i buyed some old Bostomatic BD18 with BDC3200 contol,machine is in great condition but I have one big problem.
The BDC control have Touchscreen and i started an Screen Calibrating,till then it was all good then somthing frezzed and i turn off the machine then I turn it on again but after that the touch screen dosen't respond and I cant get to start my machine,or get into any menu because it is all based on touch screen interface I have an classic pc keybord but I can't do anything with it.
Please help or suggest if someone know anything.

I hope that i post in right place.

Thanks

[cnc_Srky_cro]

Does someone know anything about Bostomatic machines?!

[joeby]

Try typing "config" then hit "enter", then type "calibrate" and hit enter. Touch lower left corner of the screen, then the upper right corner of the screen.

Hopefully that will get your screen back.

Kevin

[cnc_Srky_cro]

Thanks Joeby.
But
I've tryed that for like 100 times and the screen doesn't react on my touch.

I get the information from some people that I need some executive disc but I didn't get it with machine?
Does somebody know anything about that??

[joeby]

I don't know how to help with that. The exec disk might be what you need to fix it. Ours was always kept in the bottom of the control cabinet

I have no idea what support there is from Boston Digital now, just that it is now Mikron.

Kevin

[cnc_Srky_cro]

Yes I need the exec disk but I don't have it and the Mikron want's the hole fortune for generating the new one.

So if some one have the Exec disk for Bostomatic BD18 and copy it that would help me allot,and then maybe I could start the machine.

Till then I am desperate.

[hammondte]

Has Mikron told you if the disks are specific to that specific controller? I have exec disks for a BDC3200 but the controller is on a Vector machine.

[cnc_Srky_cro]

Thanks for reply.

It should work if the controler is BDC3200.
But it won't work if the controler is BDC3200X because it is a newer software.
I'am willing to risk if you would be so kind and send to me the copy of that exec disk because
I dont have any other option to fix that.No one in my country or near my country dosen't have that type of machine.
I don't understand what you mean by Vector machine?!
This is my machine on this picture it is allsoo Vector!

Please reply if you can.

Thank you all from forum who are trying to help.

[monitorexperts]

Hello
I need help if someone can help me.
I'm looking for copy of EXE disk for Bostomatic BDC3200 or 4000 control
I will appreciate a lot.
Thank you !
Manny