Hi Don. will you be adding Osnaps similar to AutoCAD where you can turn on a few different snaps at once. This is probably the one feature I really miss(as well as dynamic zoom and pan), and it is probably the one thing that slows down drawing in Excalibur.
It's only a small thing but I was wondering if you were looking at adding it.
Greig
Motorcycle Performance Engineering
Thread: snaps
Results 1 to 3 of 3
-
05-30-2003, 09:34 PM #1
Registered
- Join Date
- May 2003
- Posts
- 44
snaps
-
05-31-2003, 02:33 AM #2
Registered
- Join Date
- Mar 2003
- Posts
- 37
We are not really looking at multiple snaps but that could be added to our list. As far as dynamic zoom and pan, you already have it...use the dynamic rotate (2nd last button from the right on the button bar). Holding down the CTRL or SHIFT will give you pan and zoom...and of course rotate without anything being held down.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
12-10-2003, 12:28 AM #3
Community Moderator
- Join Date
- Mar 2003
- Posts
- 6855
.
Reply With Quote
Posting Permissions
