512,349 active members
2,339 visitors online
Register for free
Login
IndustryArena Forum > Events, Product Announcements Etc > Want To Buy...Need help! > Does Anyone Make Hobby Precision Worm Gears?
Results 1 to 5 of 5
  1. #1
    Registered
    Join Date
    Nov 2006
    Posts
    32

    Does Anyone Make Hobby Precision Worm Gears?

    Does anyone on CNC Zone happen to make precision Worm Gears in 4" and 6" sizes for standard off the shelf worms or can also make the matching worms. Materials of interest are bronze or aluminum with 180 or 360 teeth.

    I am interested in purchasing 1 or 2 pieces for testing.

  2. #2
    Moderator HuFlungDung's Avatar
    Join Date
    Mar 2003
    Posts
    4826
    Edward R Byers Co in Barstow, Ca makes worm gears for telescope drives. These would be fairly fine pitch in high tooth numbers intended for one revolution per day but if you can contact them, they may make anything custom.
    First you get good, then you get fast. Then grouchiness sets in.

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  3. #3
    Registered
    Join Date
    Nov 2006
    Posts
    32
    Yes I am aware of Byers however they are priced well out my budget for what I want to do. I am hoping to find someone that has precision equipment to make these in their small shop versus going with a large company.

  4. #4
    Registered
    Join Date
    Nov 2008
    Posts
    3

    small worm gears

    Try Stock Drive Products at 516-328-3300

    web www.sdp-si.com

  5. #5
    Registered
    Join Date
    Jan 2008
    Posts
    24
    You might check out "Small Parts Inc."

    Hammer

Similar Threads

  1. best lubricant for worm gears
    By cameraman32 in forum Uncategorised MetalWorking Machines
    Replies: 11
    Last Post: 08-23-2008, 02:27 AM
  2. WORM GEARS - Challenging but confusing!
    By widgitmaster in forum Mechanical Calculations/Engineering Design
    Replies: 28
    Last Post: 09-19-2006, 11:19 AM
  3. Eliminating backlash with worm gears
    By phantomcow2 in forum Linear and Rotary Motion
    Replies: 3
    Last Post: 01-27-2006, 03:17 PM
  4. Links to worm gears for 4th axis
    By mocnc in forum DIY CNC Router Table Machines
    Replies: 3
    Last Post: 12-23-2004, 12:30 PM
  5. worm gears, 4th axis
    By senor J. in forum DIY CNC Router Table Machines
    Replies: 13
    Last Post: 10-18-2004, 05:53 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •