We have a job coming up that requires 5 axis probing capabilites. Who has done this successfully on their fadal and what parts/programs did you need to complete this? 1994 6030 88hs-4 system with 5 axis
Thread: 5 Axis probing on 88hs -4 system
Results 1 to 3 of 3
-
03-29-2009, 04:31 PM #1
Registered
- Join Date
- Apr 2005
- Posts
- 1194
5 Axis probing on 88hs -4 system
We have had good luck with our Fadals milling mostly soft steel and aluminum up to 5 axis. We are always looking for spare parts
If you have a broken down Fadal give a shout.
-
03-31-2009, 08:17 PM #2
Registered
- Join Date
- Jan 2008
- Posts
- 24
For 5 axis probing there is one company that is awesome. M&H Probing Systems. We have had very good results with their 3D-Form Inspect software. They have a website but the address escapes me. You can probably google it. Their phone # for North America is 905-332-5378. Please make this call...You wont be sorry.
Hammer
-
04-02-2009, 05:20 PM #3
Registered
- Join Date
- Mar 2009
- Posts
- 3
We will be able to write custom macros that will support your needs of 5 axis probing as this is our specialty. Even if you have just some questions feel free to call and we can point you in the right direction.
Cliff
Advanced Probe Technologies
Phone: 253-848-0923
Fax: 253-799-9140
Web: www.Advprobetech.com
Reply With QuoteSimilar Threads
-
setting up 4th axis for DIY probing in Mach?
By Rich05 in forum Digitizing and Laser DigitizingReplies: 0Last Post: 01-16-2009, 03:43 PM -
Mida Wireless Intuitive Probing System
By 1ctoolfool in forum Haas MillsReplies: 0Last Post: 04-02-2008, 03:51 AM -
Which Probing System?
By jimgarner in forum Haas MillsReplies: 7Last Post: 10-31-2007, 02:17 AM -
Going from 88 to 88hs
By carbidecraters in forum FadalReplies: 1Last Post: 07-03-2007, 02:40 PM -
4-axis, 3+2, or 4+ axis programming system?
By roboticist in forum Uncategorised CAM DiscussionReplies: 0Last Post: 09-04-2006, 07:02 PM
Posting Permissions
