When I try to load a file it seems to load for a few minutes and then I get an error message 0040. I can delay the error message by clearing everything but I cannot see any files that are loaded on the machine. I just clear files and tools and it delays the error message. I am at a bit of a loss.
Steve
Results 1 to 2 of 2
-
03-30-2009, 12:51 AM #1
Registered
- Join Date
- Mar 2009
- Posts
- 6
Boss 8 Bridgeport Mill series II Error Message
-
03-30-2009, 04:15 AM #2
Moderator
- Join Date
- Nov 2004
- Posts
- 3028
Per the maintenance manual, this is error 3 in error set 3 which is a communications error fixable by operator/programmer.
Thus it could be program format, communications software, hand shake settings, cable configuration, or operator error.
George(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
Boss 8 Bridgeport Mill series II
By Stephenwinter in forum Bridgeport / Hardinge MillsReplies: 2Last Post: 09-18-2015, 06:06 PM -
bridgeport series 2 cnc boss 6
By MR Custom in forum Bridgeport / Hardinge MillsReplies: 28Last Post: 10-06-2012, 03:09 PM -
bridgeport series 1 with boss 10
By Minnesota HD 10 in forum Bridgeport / Hardinge MillsReplies: 0Last Post: 02-10-2009, 06:32 PM -
bridgeport series 1 boss 6
By MR Custom in forum Bridgeport / Hardinge MillsReplies: 11Last Post: 11-19-2007, 02:04 PM -
Bridgeport Series I Boss 4
By millwrightguy in forum Bridgeport / Hardinge MillsReplies: 6Last Post: 06-28-2007, 02:07 AM
Tags for this Thread
Posting Permissions
