I designed and build board which accept PWM&direction signals and convert it into analog +/-10VDC!
It can be used for frequency inverters or analog brush/brushless servo motor drives ( Advanced motion control )
Price per board is 15 euros. I accept only paypal. Visit http://www.custommachinedesign.co.cc
Results 1 to 1 of 1
-
04-05-2009, 05:47 PM #1
Registered
- Join Date
- Jan 2007
- Posts
- 93
PWM&direction into voltage converter
Reply With QuoteSimilar Threads
-
Help..Stuck at relay ext dc voltage missing but dc voltage OK ?
By Dirky in forum Bridgeport / Hardinge MillsReplies: 26Last Post: 05-14-2021, 06:39 PM -
G320/G340 'Required Direction Setup' and 'Required Direction Hold' times?
By margni74 in forum Gecko DrivesReplies: 2Last Post: 12-06-2008, 03:10 AM -
help CAD CAM converter
By kiethnt in forum Uncategorised CAM DiscussionReplies: 2Last Post: 03-24-2007, 03:29 PM -
Signal voltage converter?
By gotis in forum CNC Machine Related ElectronicsReplies: 4Last Post: 10-28-2006, 12:32 PM -
DC/DC converter
By Kan in forum Mazak, Mitsubishi, MazatrolReplies: 5Last Post: 01-22-2006, 10:13 AM
Posting Permissions
