584,817 active members*
4,810 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2004
    Posts
    126

    Web space available for open source cnc

    I run a small webhosting company, and I would be happy to donate some webspace to help with the open source drivers, etc.

    I could work on a clean easy to navigate design, and give plenty of space for each board to have its own page, and also have space for boards that are still being designed/tested.

    I don't think there is any need to setup another forum, this forum is great, and there are already plenty of people working on these projects, we just need a more organized site to hold all the schematics, board layouts, parts lists, etc.

    If you guys are interested please let me know.

  2. #2
    Join Date
    Mar 2003
    Posts
    6855
    We have a download section here on the site that we can upload all the files to as well. http://www.cnczone.com/modules.php?n...category&cid=5 but most prefer to upload them in the forums.

Similar Threads

  1. Need help finding CNC tutorial on the web!!
    By NewCents in forum DIY CNC Router Table Machines
    Replies: 3
    Last Post: 04-10-2009, 09:08 PM
  2. Open Source CNC Controller Specification
    By gregmary in forum DIY CNC Router Table Machines
    Replies: 28
    Last Post: 12-05-2005, 04:58 AM
  3. drilling peck chip break
    By fjd in forum G-Code Programing
    Replies: 20
    Last Post: 12-13-2004, 01:10 AM
  4. OPEN SOURCE DIY CNC "thing"
    By High Seas in forum DIY CNC Router Table Machines
    Replies: 45
    Last Post: 05-01-2004, 06:53 AM
  5. A good source of used CNC components outside the US
    By arvidb in forum DIY CNC Router Table Machines
    Replies: 6
    Last Post: 04-21-2004, 03:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •