Hello all,
we have a VF-2 HAAS MILLING MACHINE and we get the alarm 104 about the "Y servo error too large" we need and also appreciated help from your.
thanks in advanced
Joanpim
Hello all,
we have a VF-2 HAAS MILLING MACHINE and we get the alarm 104 about the "Y servo error too large" we need and also appreciated help from your.
thanks in advanced
Joanpim
may be the servo motor encoder is defective or the amplifier.
switch the amplifier of x axis to y axis connection if alarm occur the amplifier and servo might be the problem
Hello sir, did you find what was the problem with the "Y servo error too large"? I have it on the X axis. will apreciate it.