585,888 active members*
4,192 visitors online*
Register for free
Login

Thread: plasma cut part

Results 1 to 3 of 3
  1. 04-16-2009, 01:29 PM #1
    millman52
    millman52 is offline Member
    Join Date
    Feb 2006
    Posts
    1260

    plasma cut part

    Please find attached a .dwg & .dxf drawing of part. It's a simple washer, cut from clean A36 plate. 3/16 or 7ga. (use most cost effitient material)

    Part must be free of dross & burs

    OD will be fine at +/- .020 ID must fit over 1 1/2" CRR bar stock for welding.

    Bid quantitys (price per part) in what you can nest to 4' X 4' sheet. I will concider full 4' X 8' sheet quantity if it will create a significate price decrease.

    email bid to: [email protected]
    Attached Files Attached Files
    If it works.....Don't fix it!
    Reply With Quote Reply With Quote
  2. 04-17-2009, 01:20 PM #2
    jimcolt's Avatar
    jimcolt
    jimcolt is offline Registered
    Join Date
    Jan 2008
    Posts
    2247

    Part quote

    Millman,

    You can fit 175 of these washers on a 4 x4 sheet....probably can get an extra row on a 4 x 8....so could likely get 363 on a 4 x 8.

    Very simple part....will cut very well with plasma.

    I sent you a PM.

    Jim
    Reply With Quote Reply With Quote
  3. 04-21-2009, 08:27 PM #3
    Jparks54
    Jparks54 is offline Registered
    Join Date
    Dec 2008
    Posts
    7
    E-mail sent

    Thanks Joe
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Need a favor. STL converted to part file or solidworks part file.
    By Cmzwirner in forum Solidworks
    Replies: 3
    Last Post: 12-11-2008, 02:45 PM
  2. Verify Cut part to Design part.
    By CaseyCAM in forum NCPlot G-Code editor / backplotter
    Replies: 0
    Last Post: 11-02-2008, 03:22 AM
  3. Part holding and milling 3D part on 2.5D Mill?
    By john_t_h in forum MetalWork Discussion
    Replies: 6
    Last Post: 03-15-2008, 12:35 PM
  4. RFQ 6 copies, milled part, 9 copies turned part
    By sswitaj in forum Employment Opportunity
    Replies: 5
    Last Post: 01-31-2008, 08:42 PM
  5. Missing steps on just a certain part of the part
    By ZipSnipe in forum Stepper Motors / Drives
    Replies: 5
    Last Post: 01-02-2008, 08:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules