585,763 active members*
4,213 visitors online*
Register for free
Login

Thread: drivers

Results 1 to 2 of 2
  1. 04-17-2009, 03:59 AM #1
    MR MOTION
    MR MOTION is offline Registered
    Join Date
    Apr 2009
    Posts
    12

    drivers

    BobCAD – CAM

    I am a newbie and looking for information.
    a. I have a BobCad Cam program I am missing the hardware from the code to the motors. I am looking for “driver schematics” in which I could build the drivers.
    b. I happen to have the Arrick robot MD2 dual stepper motors which are presently driving my stepper motors. Is it possible to reconfigure these drivers to accept “g” code or to use part of these drivers in conjunction with different hardware to accept “g” code?


    I look forward to any input you may supply.
    Reply With Quote Reply With Quote
  2. 04-17-2009, 02:51 PM #2
    Allen123
    Allen123 is offline Registered
    Join Date
    Apr 2007
    Posts
    243
    Check out Mach 3, it's cnc pc based controller software.

    BobCAD will not drive you machine. You need a controller to do that.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. drivers
    By oldman12 in forum Stepper Motors / Drives
    Replies: 0
    Last Post: 06-01-2008, 01:40 AM
  2. Best DIY Drivers
    By dshowalt in forum Polls
    Replies: 5
    Last Post: 11-06-2007, 04:30 PM
  3. Can i use these drivers
    By erase42 in forum Servo Motors / Drives
    Replies: 2
    Last Post: 01-25-2007, 04:35 AM
  4. old drivers
    By erase42 in forum Xylotex
    Replies: 1
    Last Post: 10-23-2006, 11:08 AM
  5. my drivers
    By xtihc in forum Stepper Motors / Drives
    Replies: 22
    Last Post: 02-20-2006, 05:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules