584,830 active members*
5,686 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Sep 2005
    Posts
    92

    Planning to Buy an old HS1

    Hello, I am planning to buy an old horizontal HS1. What do you think about this machine? I only cut cast aluminum, speed is not an issue, but I would seek reliability. Thanks, George

  2. #2
    Join Date
    Apr 2006
    Posts
    133
    We have a HS-1 RP and have had a lot of trouble with the Pallet Changer.
    We have also had trouble with chips getting into the tool changer sockets, since they are inside the machining chamber.
    I would not recommend this machine unless you have a very good maintenance staff and a very good HFO to help you.

Similar Threads

  1. Planning an X2 conversion.
    By Dougal in forum Benchtop Machines
    Replies: 277
    Last Post: 03-17-2015, 08:00 PM
  2. Planning on building..
    By fragalot in forum Commercial CNC Wood Routers
    Replies: 5
    Last Post: 08-08-2008, 12:10 PM
  3. Planning a 4x4
    By Oakley1975 in forum DIY CNC Router Table Machines
    Replies: 11
    Last Post: 01-01-2008, 09:21 PM
  4. need help planning
    By russell in forum DIY CNC Router Table Machines
    Replies: 14
    Last Post: 03-18-2005, 03:18 PM
  5. Too much planning?
    By Hobbiest in forum DIY CNC Router Table Machines
    Replies: 7
    Last Post: 04-27-2004, 02:05 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •