[Turk88]

I am a machinist that has worked for the Air Force for the past 4 years. I run many different machines since we are a model shop building prototypes.

I use Mastercam and am looking to move into the programming side. I am pretty much self taught and am more experienced with the mill side. I would to find a job where I am working with another programmer or two and I can be taught more than what I currently know.

I am looking for a company that I have the ability to move up within. Mastercam is not a must but it is what I am the most comfortable using.

I can be reached at [email protected]

[Turk88]

Since this post I have taken Mastercam mill level 1 training. I also forgot to mention that I also work at a mold shop programming a Haas making rubber compression molds. I do all the programming, set-ups and inspections.

I have a good working relationship with my reseller and hope to bring that to a company that will allow me to grow with them.