584,812 active members*
5,395 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Please help with feed/rapid override parameter
Results 1 to 3 of 3
  1. #1
    Join Date
    Mar 2007
    Posts
    51

    Please help with feed/rapid override parameter

    Thank you for your interest. I recently picked up a new (to me) machine with an Om control. I cannot find the parameter that makes the machine stop in rapid when the feed knob is turned to "0". On my 0i and 18i controls it is 1401 bit 4.

    The way it is now, I need to use both knobs to creep up on a set up. Not the best way; especially when my other machines only need one. Thanks for any help in advance.

  2. #2
    Join Date
    Aug 2006
    Posts
    98
    Hermle UWF851,

    Try PRM393#5 (STOVO)

    Best Regards,

    Daniel

  3. #3
    Join Date
    Mar 2007
    Posts
    51
    Daniel,

    I thank you now; My spindle will thank you many times in the future.

Similar Threads

  1. feed override and rapid speeds
    By rkremser in forum Mach Mill
    Replies: 1
    Last Post: 02-03-2009, 03:04 PM
  2. RAPID OVERRIDE
    By CNC_BOB in forum OKK
    Replies: 5
    Last Post: 06-02-2008, 11:34 AM
  3. feed override keys
    By elpete0068 in forum Mach Wizards, Macros, & Addons
    Replies: 2
    Last Post: 01-16-2008, 08:44 AM
  4. Feed Override
    By SCOJEN in forum DIY CNC Router Table Machines
    Replies: 0
    Last Post: 01-24-2005, 07:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •