584,865 active members*
4,983 visitors online*
Register for free
Login
Page 1 of 6 123
Results 1 to 20 of 106
  1. #1
    Join Date
    Feb 2006
    Posts
    1792

    Fanuc NC GUIDE

    Has anyone used Fanuc's NC GUIDE or NC GUIDE PRO software?
    Any feedback?

  2. #2
    hello,

    could you explain what this software do? i just know about Manual Guide i, it is one of fanuc programs for conversational programming

    sting

  3. #3
    Join Date
    Feb 2006
    Posts
    1792
    You can see the simulation of a program created by you. It also has manual guide functions. Fanuc India has sent me a pdf file which describes this software. This is over 3 MB file, so I am not able to upload it here. Even the zipped version is not uploading. If you send me your personal mail ID, I will forward it to you.

  4. #4
    hello,
    Thanks for your concern, my mail is
    [email protected]

    thanks

  5. #5
    Join Date
    May 2009
    Posts
    2

    I need copy

    please send me a copy of it. my email id is [email protected]

  6. #6
    Join Date
    Feb 2006
    Posts
    1792
    sent.

  7. #7
    Join Date
    Dec 2008
    Posts
    1
    please send me a copy of it too. my email id is [email protected]

    Thanks!

  8. #8
    Join Date
    Feb 2006
    Posts
    1792
    Sent.

    If anybody has ever used it, please let me have a feedback regarding its ability in simulating a user-developed program.

  9. #9
    Join Date
    Apr 2010
    Posts
    0

    copy

    hello,
    Thanks for your concern, my mail is
    [email protected],

    thanks

  10. #10
    Join Date
    Apr 2010
    Posts
    32
    cnc

  11. #11
    Join Date
    Feb 2006
    Posts
    1792
    Quote Originally Posted by gso View Post
    hello,
    Thanks for your concern, my mail is
    [email protected],

    thanks
    Info sent.
    I am not actually recommending NC GUIDE. Rather I want feedback from the users.

  12. #12
    Join Date
    Feb 2006
    Posts
    213

    I need too

    Could also send me this file? I would much appriciate for sending this file at following email id:
    [email protected]

    Quote Originally Posted by sinha_nsit View Post
    You can see the simulation of a program created by you. It also has manual guide functions. Fanuc India has sent me a pdf file which describes this software. This is over 3 MB file, so I am not able to upload it here. Even the zipped version is not uploading. If you send me your personal mail ID, I will forward it to you.

  13. #13
    I use NC Guide Pro on a daily basic, it's the only try Fanuc CNC simulator.

    It is good for what i do - designing PMC's without the machine (can test and simulate it well).

    I also get people sending me their NC programs they have issues with, good tool test out, and the graphics are ok.

    It is a good learing tool too, when you hover over codes, it tells you what they are.

    Manual Guide i is included.

    What are your plans for it?
    The Fanuc Support Center Team
    www.fanuc-support.com

  14. #14
    Join Date
    Feb 2006
    Posts
    1792
    Quote Originally Posted by fanuc-support.c View Post
    I also get people sending me their NC programs they have issues with, good tool test out, and the graphics are ok.
    Can you please post one such program (manually coded), its 2D/3D toolpath, and the final 3D shape of the job. I guess, there is a tool library to select a tool from.
    If you desire, I also can send you a program which you can take as an example.
    Thanks.

  15. #15
    Join Date
    Feb 2006
    Posts
    1792
    Quote Originally Posted by rai View Post
    Could also send me this file? I would much appriciate for sending this file at following email id:
    [email protected]
    sent.

  16. #16
    It's not very good for 3D work. 2D and 2.5D it's ok.

    For 3D work i used vericut to test programs.

    There are tooling forms on it.

    Have you seen Manual Guide i? All NC Guide is, is a Fanuc CNC Sim on your PC and it has MGi Guide. It's very expensive for what it does, £2000 - £4000, depending on model.
    The Fanuc Support Center Team
    www.fanuc-support.com

  17. #17
    Join Date
    Feb 2006
    Posts
    1792
    I am under the impression that MGi is only for conversational part programming. It cannot show the toolpath/final shape of the workpiece, for a program created outside MGi. Pl clarify.

    If MGi can show the simulation of an external program, what is the need for NC GUIDE, if program verification is the sole purpose?

  18. #18
    Hello.

    You can simulate any Fanuc program with it. Normal G-code, MGi code, macro b etc.

    It will show tool paths and a 3d model for all of the above.

    NC guide is used for more than program verification, it is a training aid for colleges to learn the Fanuc control, or to test out the effect of parameter changes etc.

    Pro is to prove out PMC's - that is a good tool.
    The Fanuc Support Center Team
    www.fanuc-support.com

  19. #19


    Here is MGi / NC Guide with ISO Code in it.
    The Fanuc Support Center Team
    www.fanuc-support.com

  20. #20
    Join Date
    Jun 2009
    Posts
    3
    merhaba,
    Kaygılarınız için teşekkürler, benim posta

    [email protected]

Page 1 of 6 123

Similar Threads

  1. FANUC programming on the scratch guide
    By BorislavS in forum Fanuc
    Replies: 0
    Last Post: 01-09-2014, 09:45 PM
  2. Fanuc NC Guide Pro
    By GuusJ in forum Fanuc
    Replies: 3
    Last Post: 12-17-2012, 05:56 PM
  3. Fanuc 18iMB Manual Guide Milling
    By Alpha558 in forum Fanuc
    Replies: 5
    Last Post: 03-20-2012, 01:29 PM
  4. Replies: 6
    Last Post: 05-22-2011, 06:51 AM
  5. Fanuc 18i-TB with Manual Guide i problem
    By mroy0404 in forum Fanuc
    Replies: 8
    Last Post: 03-21-2010, 06:47 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •