Has any one had a problem with their tormach switching to G61, exact stop mode, on its own? This happens to me a couple times a week. I have been meaning to add G64 to my post in several different places as a safety but would like to know why it is happening.
TIA
HoweCNC
Thread: exact stop mods
Results 1 to 2 of 2
-
04-25-2009, 02:10 PM #1
Registered
- Join Date
- Mar 2009
- Posts
- 199
exact stop mods
-
04-25-2009, 07:20 PM #2
Registered
- Join Date
- Mar 2003
- Posts
- 332
It happened to me quite a while ago after messing around with wizards. I also had a problem with the write wizard (different issue) so went into the folder and hand edited the file to remove some offending code.
The change to G61 doesn't happen "on its own". It happens because a button, dro or wizard you are using has it included in the underlying vb script.
Reply With QuoteSimilar Threads
-
My machine is not cutting exact!
By greasetattoo in forum CNC (Mill / Lathe) Control Software (NC)Replies: 6Last Post: 10-20-2011, 08:11 AM -
Someone who knows an exact answer PLEASE`
By Musick7 in forum G-Code ProgramingReplies: 8Last Post: 03-10-2009, 08:12 AM -
(abnormality) cv vs exact stop
By Claude Boudreau in forum Mach MillReplies: 3Last Post: 01-18-2009, 01:33 AM -
Anyone know where to get this exact type of servo motor?
By SCCoupe in forum DIY CNC Router Table MachinesReplies: 2Last Post: 03-18-2006, 04:58 AM -
How to make the frame exact
By signIT in forum DIY CNC Router Table MachinesReplies: 5Last Post: 05-28-2004, 08:04 PM
Posting Permissions
