[Zeke13]

One of our programmers is getting an internal addressing error that stops the program.
This seems like it could be a corrupt memory issue. Anyone have any ideas?

Zeke

[Tigrita]

is the internal address error a #4 , I am having a similar problem it might have to do with a post processer requriement for useing G code .txt programs files . I am haveing a problem running a .txt file that was created in master cam

[Zeke13]

I don't remember what the error # was the 1st time, but the next time it was #10. We are using the post processor for SmartCAM that we've been using for 10+ years. If this has happened before I am unaware of it.

[Tigrita]

I am trying to use a editor called preditor , for a program that was created on master cam. It seems that the mill is not recognizing the text file for some reason I inceryed the numbers for each line obtion , I also used the ACSII sysmbol before the % and it gets the same error #4. I am not that familure with useing CNC's in the G code mode I always just used the easy track program system that it comes with

[Wallo's]

is the internal address error a #4 , I am having a similar problem it might have to do with a post processer requriement for useing G code .txt programs files . I am haveing a problem running a .txt file that was created in master cam

Tigrita.. suena medio latino tu Nick..

Can you send me email ...??

[email protected]

I work with Smartcam, Mastercam9, MastercamX2 for Bridgeport.

[Gncc50]

x