We have this machine Hawk that had this power failure on the CPU and the PSU doesn't work anymore.
After replacing the power supply with a new one, now the machine errors on the diagnostics with "nc engine base failed". After that on the screen with the report displays this:
Bridge board RT Unknown
Conv Servo Unknown
High Density I/O Unknown
Pendant Panel Unknown
Real Time Processor Unknown
There some info on this here, but the flash of the cmos is need it.
http://www.cnczone.com/forums/showthread.php?t=53762
Maybe i can get a hold of hawk150 from a local company, and if there's a way to read the cmos from that computer and try to fix mine.
Any help is appreciated......Thanks